Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. They don't get rotten or rusty like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, making it very hazardous and possibly fatal. You should take the time to make sure that your windows are in good condition.

Single-pane windows are relatively simple to replace, and they generally fit into frames of the past easily. However If you have double glazed window repairs-pane windows that are secured by internal beading, it'll be more difficult to get rid of the existing panes and install new ones. In this case you'll need to locate some plastic spacers to help the new pane to fit perfectly into the frame of the window.

If you're planning to try to remove the glass panes yourself it is important to wear the proper safety gear such as gloves that are thick and eye protection. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass so that any shards will fall onto the cloth rather than on the floor where they could be trampled on and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to stop drafts and water from entering the home until a professional can come out and repair the window repairs near me. This will also provide an obstruction to prevent criminals from getting into your home. If the distance between the window and the door is substantial, you may prefer an alarm system that has windows. This will give you the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. However, with time, they may be afflicted by a variety of issues, including sliding. A sagging window can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from becoming worse.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows to reach the frame. After that, using the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close the window and check for fitting. If you're happy with the fit, you can tighten the screws to ensure that they stay in the right place.

If you are unable to reposition the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes their tightness to decrease. If this happens, it's crucial to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and draught-proof.

UPVC handles can also loosen up. Often this is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need close the window and then perform an initial test to ensure that it fits. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't you can use a screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

It is crucial to take action if you awake each day to find mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature in your home. Most often, uPVC window repairs leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue is, old caulking may need to be removed. It is essential to remember that when it is about uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area harder to clean and can reduce the efficiency of your energy.

Check that any drainage holes have no debris inside them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

It is also important to remember that if the leakage is coming from between the glass of your double-glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. Again this can easily be corrected by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it blows open with an ease. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like any mechanical component hinges will be damaged over time. Changing a window hinge is an easy procedure, but it is easier to do with someone else to assist in holding the frame up.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The problem can be caused by opening the window incorrectly or due to a poor installation in the factory. This can often be resolved by sending us a photograph through our website and we will be more than happy to give you advice.

It is also crucial to ensure that the hinges are lubricated regularly. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the risk of a window sticking and prevent corrosion. This should be done at least once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges may also become misaligned due to wear, which can cause a gap where the sash and frame meet. This can be easily fixed by giving them a thorough clean, however if they are beyond repair it may be necessary to get them re-aligned or replaced. Secondly the interlock, this is located on the hinge of the window, can also become misaligned, again it may be feasible to give them a clean but in certain cases, it may be necessary to have these replaced.

The seals may wear out or be damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and will reduce the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. These will help to keep cold air out and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is important to remember that all windows will eventually become worn out, and it could be more cost-effective to simply replace them rather than repair them. If you are experiencing issues with your Upvc windows, it is recommended to seek help from a professional as soon as possible.