Sliding Patio Doors Repair

Sliding patio doors are a great way to enjoy your outdoor space, however they can become difficult to open and close. This can be due to various issues like dirty tracks or poorly aligned sliders.

Clean the track first and Lubricating the rollers. You can also utilize the adjustment holes on the lower part of the movable panel to re-align your rollers.

Dirty or Damaged Track

A sliding door that does not slide properly can be due to a dirty or damaged track. Over time, dirt, grit, and even rust could build up making the track unable to move smoothly. The solution is a thorough cleaning using a brush and mild detergent. This job should be done regularly to ensure a smooth operation and make sure that costly repairs are not required in the future.

A door that is leaking can be a common issue. It requires immediate attention in order to avoid structural deterioration, water damage and mold growth. The issue is usually caused by worn weather strips and misaligned door. This can be fixed by replacing the weather stripping and aligning the doors.

Another issue that is common and can be solved with a bit of DIY work is when rollers jump off their track. Recruit a friend to help you with this task as the door could be heavy. To move the rollers around, stand inside the house and lean one of the panels toward you. To stop the panel from falling, put it on sawhorses after it has been lifted off the bottom track. Then, loosen the screws that hold each roller in place and pry them out with the help of a screwdriver. It is now possible to remove any dirt that has accumulated between the wheel and the tracks. You can then clean each wheel using denatured alcohol and an rag, and then reposition the wheels and reattach them to their tracks.

If a portion of the track is bent, it may be possible to straighten it using a rubber mallet and block of wood. However, if the bent section is near the hinges and has the potential to cause further damage, you'll be better off calling in an expert for safety reasons.

Rollers that are not aligned

If your sliding door is having problems with sliding patio door repair, it is likely that the rollers have been misaligned. The wheels could be rusted or dirty, and their bearings are worn down. This friction causes the door to catch and grind when it's opened or closed. This can also result in noises that squeak.

This is a simple solution. It is not necessary to take off the door to access the wheels, since they are mounted on a bracket that's adjustable. Find the adjustment holes (usually on either side of the frame) and use a screwdriver to rotate the screws that control the wheels. Rotating the screw clockwise will raise the wheel, while rotating it counterclockwise will lower it. Continue adjusting the door until it opens and closes effortlessly.

It is important to adjust the wheel prior to adjusting your latch. In order for the lock to function properly the latch hooks have to be aligned with the strike plate. If you do not do this, the latch may open or close by accident when you're out of the room.

Sliding patio door are an investment. Maintaining them in good working order will ensure the safety of your family. By addressing common problems like faulty tracks, rollers and handles, you can avoid costly repairs in the future. For more help with your patio doors repair near me doors, call our team. We will assess your sliding patio door repair needs and help you keep it in good condition. Our professionals can also assist with any replacement parts you might require.

Damaged or loosely hung door frame

Sliding patios doors are a great option for any home. They are a practical and attractive alternative to swing-open or hinged patio door options. Like any other type of hardware doors, they can experience various issues over time. Many of these problems are fixable with a little DIY knowledge.

A common issue that affects sliding glass patio doors repair patio doors is gaps in the frame. It can be caused by many reasons, including tracks or rollers that are not aligned properly, a damaged door or track, or a bent door frame. In most cases, the problem can be easily fixed by taking the doors off and reattaching the track. This must be done with care to not damage the frame or track.

In some cases it is necessary to replace the entire track. This is easily done with a universal replacement kit that is available at most major hardware stores. These kits are simple to install and will get your door functioning properly again in no time.

Examine the hardware of your sliding door and frame for signs of wear, such as loose bolts or screws. This is a simple and efficient DIY patio door repair service maintenance task that can be accomplished with the help of a screwdriver. It is also essential to lubricate the tracks and rollers of your patio door to ensure smooth operation and to keep them from wearing out prematurely.

For many homeowners, their patio doors are the primary access to their backyard and outdoor living space. Therefore, they have to be able to function properly in order to maintain the comfort of their home and provide security. By following these simple DIY maintenance techniques, homeowners can prolong the life of their patio door and cut down on costly repairs or replacements.

Faulty Handle

Sliding patio door are a great way to get into your home and access your backyard, however they can become difficult to operate when they are not aligned properly. A damaged handle could cause the door to not shut or open properly. Repairing a damaged handle can be accomplished at home.

In many cases the reason for a loose grip is a result of screws that have fallen out of the backplate. To remedy the issue, tighten the screws on the inside handle with the help of a screwdriver. If you notice that the handle remains loose, it could be a sign that the threads have worn and will need to be replaced.

A broken latch could be the cause. It is more likely the latch will break if it is made of metal, instead of plastic. Try lubricating the latch to see if it's not engaging or turning. If not, you might have to replace the lock entirely.

If the handle is cracked or broken, it could be difficult to use. If this happens it is necessary to replace it with a new handle that matches the style of your sliding patio door.

Feldco can help you restore your patio doors back to their former splendor, whether they're brand new or old-fashioned. We have high-quality doors available in a variety of sizes and styles that can be fitted to perfectly fit your home. Contact us today to find out more about our products! We provide homeowners with our services in Southern California, including Ventura County, Orange County & San Diego County.

Faulty weatherstripping

It's time to upgrade your weather stripping if notice light coming from doors and windows or sense a draft pulsing at the door or window. The strips form an airtight seal that stops unwanted air, pests and water from entering the home. It also helps keep your conditioned and heated air in, saving you money on your energy bills all year long.

Based on the age of your weather stripping, it may have deflated and lost its buoyant, positive seal. This is easy to diagnose by using a dollar bill and putting it under the seal along the top of the door frame as well as the bottom of the door jamb where the two overlap. If the dollar bill slides effortlessly between the seal and the door is the time to replace the weather stripping.

If you replace only the worn-out portion of weather stripping, this could cause future problems with the seal. It's more efficient to replace the entire stripping, so that you can rest assured knowing your door is properly sealed once again.

Follow our DIY guide to weather stripping and install the right material on your sliding patio door and frame to ensure a secure, lasting seal. It's a great method to repair your door and save on your energy bills and you shouldn't wait until it's too late. Your wallet and your home will be thankful.