Bio-Fires - An Eco-Friendly Alternative to Real Fires

Biofires are a warm and comfortable way to heat your home without the harmful gas or soot. They are simple to set up as an electric fire.

The BARDA contract supports the development of the BioFire emerging CoV panel, which is a nucleic acid amplifying test that can be used with BioFire filmArray Systems for detection of human acoronaviruses from nasopharyngeal oropharyngeal swabs as well as saliva samples.

Eco-friendly

Bioethanol is an eco-friendly alternative for gas or wood. The fuel is made from plant by-products and uses an natural process to convert sugars into alcohol. It has many benefits over other types of fireplaces, including the absence of harmful emissions and a much lower carbon footprint. bioethanol fireplace log burner is also a more secure alternative to other types of fires because it doesn't produce soot or smoke. It does not require a flue and can be used anywhere in the garden or home.

Multi-drug resistant bacteria (MDR) are among today's most serious health threats. New testing methods can identify MDR bacteria early and avoid further complications. BioFire FilmArray is one of these tests. This test employs an approach based on symptoms to identify the most frequent pathogens that cause sepsis. The results are available within an hour so that doctors can start treatment immediately.

Molecular PCR is a method that amplifies DNA or RNA molecules into millions or billions of copies. This allows for the analysis of small samples of body fluid or tissue to determine if certain genetic sequences are present. It is a useful tool for lab professionals, and helps them identify serious illnesses in an efficient and cost-effective manner. The BioFire film array PCR system is a revolutionary tool for infectious diseases diagnosis. It can be used in a variety of environments such as hospitals and laboratories.

For respiratory tests the simplest swab could be wiped across your nose and sent to the lab to be analyzed. BioFire's system lets clinicians react quickly and with a short turnaround time. This means less time waiting for results and improved outcomes for patients.

The Chanouf Farm-Biofire business has developed an Agroforestry waste recycling system, that makes use of olive and pear tree waste to make organic charcoal and biomass energy. The resulting products are sold to the public as a sustainable alternative to traditional charcoal briquettes made of coal and wood. Additionally the bio-waste products can be burned in the Kachelofen fireplace which produces radiant heat that is a green alternative to gas and electric fires.

Clean burning

When you utilize a bio fire, read more on Toptohigh`s official blog, you aren't just reducing energy consumption, you're also helping the environment by using a sustainable fuel source. This is because the burning of bioethanol doesn't release any harmful gasses like carbon dioxide. Instead, it releases only heat and water vapour. This makes it a cleaner and safer option for indoor use.

Ethanol is produced by the fermentation of plant sugars and is classified as an energy source that is renewable. This means it can be produced quickly and will not run out like fossil fuels like oil and coal. The use of bioethanol fires also helps to reduce the dependency on imports from foreign countries and reduces the risks associated with shortages in supply.

Bio-fires are simple to install and can be utilized in existing biofuel fireplace openings, or as freestanding units. This makes them an alternative to gas and wood fires. They are a great option for homes and offices that don't have a chimney.

When a bio fire is lit, a special media is created inside the burner that absorbs liquid fuel ethanol while making it ready to burn. The ethanol fuel is ignited in the flames, and the vapours are released into the air through the vent. This makes the flames appear more natural and give an amazing beauty that cannot be replicated with wood or gas fires.

Bio-fires are a great alternative to not needing a vent or flue to replenish oxygen during combustion. They also don't produce the carbon monoxide that must be vented out into the room in gas fires with open fronts.

The BioFire Respiratory panel makes use of multiplex PCR to simultaneously test for respiratory pathogens. This takes about an hour. This enables doctors to identify and rule out respiratory illnesses quicker than they could with conventional tests that require patient visits. Both patients and the health system benefit from this.

Safe indoors

Bio-fires can be used indoors more safely than traditional fires since they don't release smoke, ash, or carcinogenic fumes. They don't release carbon monoxide which is harmful if inhaled. However, the bio-ethanol fireplace fuel is flammable and you should be cautious when handling your burner and refilling it. It should be replenished only after the burner has been shut off and the fire is cool. Any spills need to be cleaned immediately.

The company's diagnostic FilmArray system--BioFire Torch and BioFire 2.0--are simple to use and can run eight different diagnostic panels cleared by the US Food and Drug Administration and three additional panels that are approved for emergency use and six environmental test panel. These tests include a brand new respiratory panel that was designed to quickly detect and differentiate between respiratory illnesses, including COVID-19 and emerging coronaviruses.

The COVID-19 panel has been awarded a grant by the Biomedical Advanced Research and Development Initiative (BARDI), which is part of the US Department of Defense's Strategic Access Program. The COVID-19 system is based on antigens, which allows physicians to differentiate symptoms caused by COVID-19 from other respiratory infections. This test has similar level of accuracy to the rapid antigen tests that are currently used.

The company is also working on an SARS-CoV-2 test to be used in its Respiratory Panel 2.1. The multiplexed nucleic acid test for amplification will be available on the BioFire filmArray 2.0 and Torch Systems and will detect SARS CoV-2 and 21 respiratory pathogens from saliva and nasopharyngeal samples within less than a half hour. The test is being developed in a rapid timeframe, and submission to the FDA for EUA and 510(k) approval is expected in the third quarter of 2020.

Bio-ethanol flame effect fires are safe to use but should be kept away from combustible items such as pillows, curtains and blankets. They should not be set close to anything that could ignite and you should keep flammable materials at least 10 feet from them. The bioethanol fireplace uk fuel must be stored in a dry, secure space that is not easily reached by children or pets.

Simple to use

A bioethanol fireplace is easy to use and has no flue to worry about. It is all you need is a place to store the fuel and a place to store it. Once you've filled the burner with fuel, light it. This will ignite a flame that looks just like an actual fire. When the flame is lit, it will heat the room without releasing much smoke. It will also produce heat similar to a fireplace that burns wood. Bio fires are also very easy to maintain and don't need any servicing, just the odd wipe down.

In contrast to other tests that are quick however, the BioFire RP2.1-EZ test uses a syndromic method to identify the most common signs of infection and returns results in just 45 minutes. This test is designed for patients with respiratory symptoms that are upper respiratory and has a 98% specificity rate. The test can detect 19 viruses and three bacteria in one sample, making it an excellent option for managing patients.

The BioFire system integrates multiplex PCR testing, sample preparation and result reporting into one integrated platform. This lets laboratories to streamline their workflow and eliminates the necessity for a sequential approach that involves sending out a single test. This can lead to better patient outcomes, by allowing the correct test to be used the first time and also by removing the need for expensive culture-based tests. In addition, the BioFire system can identify pathogens as well as their resistance genes to antimicrobials at the molecular level, giving information that is more accurate than conventional methods.

Molecular diagnostics are increasingly being used to improve the care of patients and outcomes. The BioFire RP2.1 plus panel employs a syndromic approach to simultaneously target 23 of the most commonly implicated pathogens in respiratory infections. The test can be performed on the BioFire FilmArray 2.0 and Torch systems and results are available in approximately 45 minutes.

This test is available in the US under FDA Emergency Use Authorization. It will be available commercially after initial DoD demands are met. The BioFire Defense team has also created a fully automated sample-to result assay for rapid detection of COVID-19. This assay is in development and will be made available once initial DoD requirements are met.