Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they do not rust or rot.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good condition.

Single-pane windows are fairly simple to replace and generally fit into frames of the past easily. If you have double-paned windows which are held together by internal beading, it will be difficult to remove and replace the old panes. In this case, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

If you are going to attempt to remove the window repair near me panes yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the glass, so that any fragments of glass fall on the fabric instead of landing on the floor where they can be trodden under and cause further damage.

Once the glass is removed from the window, it's best to cover the gap with clear packaging tape or duct tape to block water and drafts from getting into the property until a professional is able to come out and fix the window. It also acts as a barrier, deterring any intruders to gain access to your home. If the gap between the door and the window is substantial, you may want to use security screens that includes a window. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. As time passes, they may develop a number of problems that include sagging. A sagging uPVC windows can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from worsening.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to unblock the windows to reach the frame. Then, using an screwdriver, unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you've repositioned your hinges. If you're satisfied with the size of the window, tighten the screws to secure them in place.

If you cannot reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to loosen. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and safe from drafts.

uPVC handles can also loosen up. This is usually due to screws that have been removed over time, but it could be due to the mechanism of the handle wears out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the window and perform a test to ensure that it fits. The corner joints of the sash must align with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it is important that you take action. Water leaks from windows are not just a cause for degrading of the structure of your home but also undermine your efforts to regulate the temperature within your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on how severe the issue is, old caulking might need to be removed. It is important to keep in mind that when it comes to Upvc Window Repair window repairs you should not be tempted to apply too much caulk and then make the area more difficult to clean and can reduce your energy efficiency.

Verify that the drainage holes do not have debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more serious situations, you may need to think about replacing the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.

It is also important to keep in mind that if the leakage originates from the glass of your double-glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open in a breeze It could be hinges that are at the fault. They can be replaced by any competent DIYer and are usually completed in a matter of minutes.

Like all mechanical parts hinges will be damaged over time. The process of replacing a hinge on a window is essentially a very simple process, but it's simpler with someone else to help you hold the frame in place.

Make sure that the upvc window repair hinges are open and closed in the proper direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The issue could be caused by opening the window improperly or due to a poor installation in the factory. Sending us a picture via our website is often enough to solve the issue. We are more than happy to give suggestions.

It is also essential to grease the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of various factors. The hinges can also be unbalanced due to wear, which can cause an opening where the sash and frame meet. If they are damaged beyond repair, it could be necessary to get them re-aligned. Second, the interlock can be unbalanced. This is located on the hinge's side, and might require to be cleaned. In some cases it is possible to replace them.

The second most frequent cause of draughts is the window seals, these can become worn down or damaged over time and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping will help to prevent draughts. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures, and reduce draughts.

Lastly, one of the most effective methods to reduce drafts is to use an draught excluder. These are typically fabric tubes which are filled with a sort of filler and can be positioned on the windowsill on top. These will help to block out cold air and keep your home warm and cosy!

With a little regular maintenance and repairs your windows made of upvc will provide a great level of insulation and security for your home. It is essential to remember that all windows eventually wear out and it is more cost-effective to replace them than to repair them. So, if you're experiencing issues with your Upvc windows, it is recommended to seek help from a professional immediately.