Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not decay or rust as aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to ensure that your windows are in good working order.

Single-pane windows are relatively easy to replace and typically fit into old frames very easily. However, if you have double pane windows that are secured by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this instance it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you are going to try to remove the window panes yourself it is crucial to wear appropriate safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric and not on the floor, where they could be trampled.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop drafts and water from entering the property until a professional can come out and repair the window. This will also provide an obstacle to stop intruders from getting into your home. If the gap between the door and the window is substantial, you may want to use security screens that has windows. This will give you the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can develop a variety of issues that include sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. It's crucial to act immediately if you discover that your uPVC windows are falling down.

To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll need to open the window so that you can access the frame. Then, using the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and check for fit. If you're happy with the fit, tighten the screws until they stay in place.

If you are unable to reposition the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes their tightness to decrease. It is essential to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is often caused by screws that have been removed over time, but it can be caused by the handle mechanism getting worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need to shut the window and perform an experiment fitting. The joint at the corner of the sash should align with the joint on the casing. If it isn't then you can make use of a screwdriver to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

It is crucial to take action if wake up every morning to find a smoky wall and floors that are wet. Leaks of water from windows can cause structural damage to your home, and hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by any DIYer who is competent. Depending on the severity of the problem the old caulking might need to be removed before a new layer is applied. When it is time to uPVC repair, you should be careful not to over-caulk. This will make your window more difficult to clean and decrease its energy efficiency.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you may have to replace the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This mold thrives in damp environments and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is more related to the seal, not the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with ease It could be hinges at the fault. These are easily repaired by any DIYer who is skilled and are usually completed in a matter of minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. The process of replacing a hinge on a window is essentially a simple process, but it's easier to do when you have a person to assist in holding the frame in place.

It is also important to ensure that the upvc window repairs near me hinges are opening and closed in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The issue could be caused by opening the window incorrectly or by a poor installation at the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be more than happy to give you suggestions.

Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It can also lower the risk of a window getting stuck and stop corrosion. This must be done at a minimum once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. The hinges can also become disaligned as a result of wear, causing an opening between the frame and sash. If they are beyond repair, it could be necessary to have them realigned. The second is the interlock, which is located on the hinge of the window, may also be misaligned, and again it's possible to just give them a thorough clean, however in some instances it could be necessary to have these replaced.

The next most common cause of draughts is the window seals. They are susceptible to being worn out or damaged over time and let air escape through the gaps. Installing high-quality weatherstripping will help to stop draughts. Replace the upvc windows with low-emissivity glass. This will help control indoor temperatures and decrease the risk of draughts.

Another, and most effective ways to reduce drafts is to use a draught excluder. These are typically fabric tubes that are filled with some kind of filler. They can be placed on top of your windowsill. These will keep your home warm by blocking out cold air.

With a little maintenance and repairs windows made of upvc will continue to provide excellent security and insulation for your home. However, it is important to recognise that windows last for a certain period of time and eventually, they will reach the point when it's more efficient to replace them than fix them. If you are experiencing issues with your Upvc window you should consult an expert as soon as you can.